ACS709 Current Sensor Carrier -75A to +75A

Pololu item #: 2199
Brand: Pololu supply outlook
Status: Clearance 
RoHS 3 compliant

Price break Unit price (US$)
1 5.95 14.95


backorders allowed

Clearance notice: These older current sensors are on clearance at a discounted price and will be discontinued once remaining component stock is depleted.

This board is a simple carrier of Allegro’s bidirectional ±75A ACS709 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.1 mΩ) current path and electrical isolation. The sensor has optimized accuracy for currents from -37.5 A to 37.5 A, and the analog voltage output is linear for current magnitudes up to 75 A. The ratiometric output voltage is centered at VCC/2 and has a typical error of ±2%. It operates from 3 V to 5.5 V, so it can interface directly to both 3.3 V and 5 V systems.

 Description Specs (9) Pictures (6) Resources (2) FAQs (0) On the blog (0) 

Dimensions

Size: 0.82″ x 0.9″
Weight: 1.7 g1

General specifications

Current sense: 0.018 V/A2
Minimum logic voltage: 3 V
Maximum logic voltage: 5.5 V
Supply current: 11 mA
Current sensor: Allegro ACS709LLFTR-35BB

Identifying markings

PCB dev codes: cs03a
Other PCB markings: 0J3224

Notes:

1
Without included optional header pins.
2
When Vcc is 3.3 V. This specification is proportional to Vcc.

Related Products

0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle
T Connector Male-Female Pair

Related Categories

Clearance Current Sensors
ACS724 Current Sensor Carriers
Terminal Blocks
Premium Jumper Wires
Wires with Pre-Crimped Terminals
0.1″ (2.54 mm) Male Headers
Electronics Prototyping
Motion Control Modules
Motors and Gearboxes
RC Servos
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors