Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (old version)

Add quadrature encoders to your LP, MP, or HP micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit.

Note: This version is not compatible with the HPCB micro metal gearmotors; it is only compatible with LP, MP, and HP dual-shaft micro metal gearmotors.

	Description		Specs (6)		Pictures (12)		Resources (5)		FAQs (0)		On the blog (2)

File downloads

Magnetic Encoder Kit for Micro Metal Gearmotors schematic diagram (125k pdf)
Infineon TLE4946-2K Hall Effect sensor datasheet (1MB pdf)
Dimension diagram of the Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (old version) (190k pdf)
3D models of Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (old version) (531k zip)

This file contains 3D models (in the step file format) of the components for the Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (old version)
Drill guide for the enc03a encoder PCB (24k dxf)

This DXF drawing shows the locations of all of the board’s holes.

Related products

	10:1 Micro Metal Gearmotor HP 6V with Extended Motor Shaft
	298:1 Micro Metal Gearmotor LP 6V with Extended Motor Shaft
	Magnetic Encoder Disc for Micro Metal Gearmotors, OD 7.65 mm, ID 1.0 mm, 12 CPR (Bulk)
	Optical Encoder Pair Kit for Micro Metal Gearmotors, 5V
	Optical Encoder Pair Kit for Micro Metal Gearmotors, 3.3V
	Magnetic Encoder Pair Kit for Mini Plastic Gearmotors, 12 CPR, 2.7-18V
	Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V